Installations

Run a Validator

This article will guide you on how to run the Transformers application on CentOS7, ubuntu-22.04-desktop-amd64 operation system to join in Transformers network.

Recommended Configuration

Software requirements：

Operation system：ubuntu-22.04-desktop-amd64 system.

Development environment:

If you need to perform secondary development on the source code, please follow the steps below to set up the environment. If you do not need to perform secondary development, please proceed directly to the installation steps.

The following software packages need to be installed：

- gcc （v9.3）
- cmake（v3.21）
- git 
- unzip 
- zip
- autoconf 
- automake 
- libtool
- perl-IPC-Cmd

Dependent Libraries：

- zlib 
- zlib-devel

Orders:

yum install -y zlib zlib-devel  
yum install -y unzip zip  
yum install -y autoconf automake libtool
yum -y install perl-IPC-Cmd
yum install -y devtoolset-9-toolchain
scl enable devtoolset-9 bash

scl enable devtoolset-9 bash is used to set gcc tool chain to devtoolset-9

CMake upgrade

tips:

The CMake version should be at least 3.15.x and the recommended version is 3.21.x

curl -O https://cmake.org/files/v3.21/cmake-3.21.4.tar.gz
tar zxvf cmake-3.21.4.tar.gz
cd cmake-3.21.4
./configure 
gmake && make install

1. Source code compilation

If you do not want to compile the source code for installation, please proceed directly to package installation.

Getting source code

git clone https://github.com/tfs-labs/tfs

Compiling

cd TFSC
mkdir build_primary_release && cd build_primary_release
cmake .. -DPRIMARYCHAIN=ON -DCMAKE_BUILD_TYPE=Release && make

The program will generate relevant files in the bin directory after compilation.

Verify the CentOS server time

caution

Ensure that the time of each node is the same and that the transaction is reliable when it is linked

1. Install NTP
sudo yum -y install ntp

2.Use ntpdate to test NTP
ntpdate pool.ntp.org

3.check sever time
date

4.Start ntpd daemon for calibration time
systemctl start ntpd

5.Check whether the ntpd daemon is started
systemctl status ntpd

2. Program compilation

Download && init

Go to Transformers Version Updates page to find the latest package download.

Download the main network program（tfs_v1.0x.x_dev.zip）, then unpack to get the tfs_v1.0x.x_dev binary executable, and then modify the execution permission of the program.

 unzip tfs_v1.0x.x_dev.zip
 chmod +x tfs_v1.x.x_dev
 ./tfs_v1.x.x_dev

Starting the program ,and the configuration file will be automatically generated.

 ./tfs_v1.0x.x_xxxxx_dev

View the contents of the config.json file

{
    "http_callback": {
        "ip": "",
        "path": "",
        "port": 0
        },
    "http_port": 20620,
    "info": {
        "logo": "",
        "name": ""
        },
    "ip": "192.168.1.1",
    "log": {
        "console": false,
        "level": "OFF",
        "path": "./logs"
        },
    "rpc": false,
    "server": [
        "13.52.162.66",
        "52.52.118.136"
        ],
    "server_port": 20619,
    "version": "1.0"
}

Modify `config.json` file

"server" field: This field fills in any ip node in the Transformers network,Obtain IP information of other nodes through the http://yournode:http_port/pub interface.

"server_port" field: This field is the network connection port number (it does not need to be changed by default)

"Log" field: "Console" indicates whether the log is output on the screen;"Level" indicates the level of output log;"Path" indicates the path of the default log generation.

"Ip": the system will detect the local ip and automatically fill in this field when starting.

"Http_port": the port of the http service.

"Rpc": the switch of the access interface, the interface can be accessed when it is turned on, and it is turned off by default.Introduction of specific application scenarios in Developers

"Info": the logo and name of the node set by the user.

"Http_callback": http callback interface,Introduction to specific application scenarios in Callback interfaces.

"Version": the version of the config file.

To view the automatically generated directories and files under the current directory.

cd  tfs_v1.0.x_xxxx_testnet

Files or directories	Type	Description
cert	folder	Store the generated private key with the suffix ".private" as a private key file
data.db	folder	Store database file
logs	folder	Store log file
config.json	json file	configuration file

tips:

Protect your private key

The private key in the cert must not be lost.

Open corresponding port shall be port 20619、port 20620.

Start The Node

Directly start the program

./tfs_v1.0.x_xxxx_testnet

Add parameter[ -m ] to start the program to display menu

./tfs_v1.0.x_xxxx_testnet -m

Time display box

UTC time and server time display:

UTC Time: 2024/01/19 02:00:24
Ntp Time: 2024/01/19 02:00:24
ThreadNumber:265

caution

The validator server must be consistent with UTC time, and not synchronizing will result in the inability to verify transactions

Account display box

Account information display:

*********************************************************************************
Version: 1_1.0.0_d
addr: 0x9B7723CdBaaa04Eb63efC14676030F21F76Cda18
Balance: 0.00000000
Block top: 0
*********************************************************************************

illustrate

Version: Version number of the program

addr: addr is a public and private key string generated by the keccak256 encryption algorithm, used for the address of the wallet.

Balance: Balance for the corresponding Base58.

Block top: The height of the current block.

1.Transaction
2.Stake
3.Unstake
4.Delegate
5.Withdraw
6.Get Bonus
7.PrintAccountInfo
8.Deploy contract
9.Call contract
10.Account Manager
0.Exit
Please input your choice:

Explain the function of the menu.

Order	Menu Items	Function
1	Transaction	Validator provides command line transfer function, and can complete TTOS transfer according to prompts
2	Stake	Becoming a validator node requires staking a certain amount of TTOS
3	Unstake	Revoke your stake operation. Please understand the stake rules before revoking
4	Delegate	Delegate TTOS to validators to obtain revenue,is equivalent to investing
5	Withdraw	Revoke your investment in validators
6	Get Bonus	The validator needs to claim its own rewards every day in order for delegators to receive their investment dividends
7	PrintAccountInfo	Print account information,View your own balance changes and block heights
8	Deploy contract	deployment smart contract
9	Call contract	Execute smart contract
10	Account Manager	0. Exit 1. Set Default Account 2. Add Account 3. Remove 4. Import PrivateKey 5. Export PrivateKey
0	Exit	Exit the program

As an RPC node

If you want your validator to act as an RPC node, it only takes a few simple steps to complete.

Modify the config.json file and set rpc to true

 "rpc": true,

Configure the value of http_port as the HTTP access port.

 "http_port": 20620,

Complete configuration example:
Enable RPC node service and set callback interface

{
    "http_callback": {
        "ip": "192.168.1.123",
        "path": "/path/rollback_block",
        "port": 6071
    },
    "http_port": 20620,
    "info": {
        "logo": "",
        "name": ""
    },
    "ip": "192.168.1.119",
    "log": {
        "console": false,
        "level": "debug",
        "path": "./logs"
    },
    "rpc": true,
    "server": [
        "192.168.1.217",
        "192.168.1.126"
    ],
    "server_port": 20619,
    "sync_data": {
        "count": 50,
        "interval": 50
    },
    "version": "0.39"
}

Restart the tfs program after the settings are complete

To test whether the RPC node is enabled, you can query the node information for detection.

Installations

Run a Validator

Recommended Configuration​

Software requirements：​

Development environment:​

1. Source code compilation​

2. Program compilation​

Download && init​

Modify config.json file​

Start The Node​

Time display box​

Account display box​

Menu display box​

As an RPC node​